Holden Trax (2013–2020): Clicking Sound Causes, Troubleshooting & Repair Costs

1. Diagnostic Overview for Holden Trax (2013–2020)

When a Holden Trax (2013–2020) develops a clicking sound, it typically occurs when outer constant velocity (CV) axle boots tear and lose grease, or when dashboard HVAC blend door actuators strip plastic gears.

Platform-Specific Advisory: On this vehicle, pay specific mechanical attention to 1.4 Turbo coolant expansion tank cracking and front stabilizer bar link clunk. Addressing the acoustic symptom early prevents cascading failures in neighboring engine or chassis subsystems.

2. Step-by-Step DIY Mechanical Inspection Checklist

Before taking your Holden Trax (2013–2020) to a garage, perform these visual and physical checks safely:

• Perform a slow full-lock turn in an empty parking lot; rhythmic clicking on tight turns confirms outer CV joint failure.
• Look behind front wheels for torn accordion CV rubber boots and flung black axle grease.
• Listen behind dashboard when changing temperature or air recirculation; rapid clicking confirms stripped blend door gear.
• Check brake caliper guide pins and anti-rattle clips for missing hardware or loose fit.

3. Estimated Repair Costs & Part Replacements

Standard workshop repairs for a clicking sound on a Holden Trax (2013–2020) typically fall in the range of $80 – $480.

Pricing varies based on genuine OEM vs. aftermarket component selection, mechanic labor rates, and whether related hardware (such as mounting bolts, seals, or tensioners) requires simultaneous renewal.