2018-2022 Honda Accord Trouble Code P0101: Mass Air Flow (MAF) Circuit Range / Performance
If your 2018-2022 Honda Accord (1.5L VTEC Turbo (L15BE), 2.0L VTEC Turbo (K20C4), 2.0L Hybrid) is triggering code P0101, accompanied by Engine hesitation, stalling when coming to a stop, erratic rev hunting between 600–1,200 RPM, inspect the primary mechanical failure points below. You can record your live engine sound to verify symptoms with Carithm's free neural acoustic engine.
🎙️ Free Honda Accord Engine Sound Diagnoser
Neural Engine ReadyTip: Hold your smartphone microphone 12–18 inches above the valve cover or near the tailpipe while recording.
Vehicle-Specific Causes for 2018-2022 Honda Accord
On the 10th Gen Midsize Platform equipped with the 1.5L VTEC Turbo (L15BE), 2.0L VTEC Turbo (K20C4), 2.0L Hybrid, our automotive repair database indicates the following primary root causes for P0101:
Documented Failure Pattern:
Electric brake booster pedal stroke sensor calibration or blind-spot BSM radar communication drop.
General Root Causes: Dirty MAF hot-wire sensor, air intake duct leak between MAF and throttle body, or clogged engine air filter.
Quick DIY Verification Steps
Before scheduling an expensive workshop appointment, perform these basic diagnostic checks:
- Acoustic Isolation: Does the engine make Engine hesitation, stalling when coming to a stop, erratic rev hunting between 600–1,200 RPM? Note if the frequency doubles with engine RPM or remains constant.
- Targeted Physical Check: Remove MAF sensor and spray delicate sensing wire with CRC Mass Air Flow Sensor Cleaner; do not touch wire.
- AI Audio Cross-Check: Use the free tool above to analyze your engine audio recording for mechanical harmonic abnormalities.
Estimated Repair Cost Benchmarks
Typical repair costs for resolving P0101 on a 2018-2022 Honda Accord at certified independent repair shops:
| Diagnostic & Repair Tier | Estimated Parts | Estimated Labor |
|---|---|---|
| Minor (Sensor clean, hose, wiring repair) | $50 – $75 | $42 – $58 |
| Moderate (OEM Sensor, injector, coil pack) | $80 – $140 | $63 – $100 |
| Comprehensive (Timing, manifold, internal) | $252 – $490+ | $180 – $300+ |
*Cost estimates based on national US independent mechanic labor rates ($110–$160/hr). Dealership pricing may be 30–50% higher.
Frequently Asked Questions
What does code P0101 mean on a 2018-2022 Honda Accord?
Code P0101 indicates Mass Air Flow (MAF) Circuit Range / Performance. On the 2018-2022 Honda Accord (1.5L VTEC Turbo (L15BE), 2.0L VTEC Turbo (K20C4), 2.0L Hybrid), this fault is commonly triggered by: Electric brake booster pedal stroke sensor calibration or blind-spot BSM radar communication drop.
Is it safe to drive my 2018-2022 Honda Accord with code P0101?
Severity Assessment: 🟠 Moderate Risk. If your check engine light is flashing or accompanied by rough running, hesitation, or unusual mechanical knocking, discontinue driving immediately to avoid catalytic converter burnout or valvetrain destruction.
What engine sounds are associated with P0101 on 2018-2022 Honda Accord?
Drivers frequently report: Engine hesitation, stalling when coming to a stop, erratic rev hunting between 600–1,200 RPM. Listening closely to your engine audio helps verify whether the root failure is an electrical sensor glitch, vacuum line leak, or mechanical valvetrain wear.
How much does it cost to fix code P0101 on a 2018-2022 Honda Accord?
Estimated repair costs for the 2018-2022 Honda Accord typically range from – for replacement parts and – for professional labor at certified independent repair shops.