2020-2024 Ford Explorer Trouble Code P0341: Camshaft Position Sensor Range / Performance
If your 2020-2024 Ford Explorer (2.3L EcoBoost I4, 3.0L EcoBoost Twin-Turbo V6, 3.3L V6 Hybrid) is triggering code P0341, accompanied by Engine misfire sputter under acceleration, intermittent timing cover ticking, inspect the primary mechanical failure points below. You can record your live engine sound to verify symptoms with Carithm's free neural acoustic engine.
🎙️ Free Ford Explorer Engine Sound Diagnoser
Neural Engine ReadyTip: Hold your smartphone microphone 12–18 inches above the valve cover or near the tailpipe while recording.
Vehicle-Specific Causes for 2020-2024 Ford Explorer
On the CD6 Rear-Wheel Drive Unibody Mid-Size 3-Row SUV equipped with the 2.3L EcoBoost I4, 3.0L EcoBoost Twin-Turbo V6, 3.3L V6 Hybrid, our automotive repair database indicates the following primary root causes for P0341:
Documented Failure Pattern:
10R60 10-speed transmission lead frame solenoid failure (P0700/P0751) or electric steering rack angle sensor.
General Root Causes: Excessive timing chain slack causing signal misalignment, cracked sensor reluctor wheel, or faulty sensor.
Quick DIY Verification Steps
Before scheduling an expensive workshop appointment, perform these basic diagnostic checks:
- Acoustic Isolation: Does the engine make Engine misfire sputter under acceleration, intermittent timing cover ticking? Note if the frequency doubles with engine RPM or remains constant.
- Targeted Physical Check: Inspect camshaft sensor connector pins for corrosion and check timing chain tensioner extension.
- AI Audio Cross-Check: Use the free tool above to analyze your engine audio recording for mechanical harmonic abnormalities.
Estimated Repair Cost Benchmarks
Typical repair costs for resolving P0341 on a 2020-2024 Ford Explorer at certified independent repair shops:
| Diagnostic & Repair Tier | Estimated Parts | Estimated Labor |
|---|---|---|
| Minor (Sensor clean, hose, wiring repair) | $43 – $64 | $84 – $117 |
| Moderate (OEM Sensor, injector, coil pack) | $68 – $120 | $126 – $201 |
| Comprehensive (Timing, manifold, internal) | $216 – $420+ | $361 – $603+ |
*Cost estimates based on national US independent mechanic labor rates ($110–$160/hr). Dealership pricing may be 30–50% higher.
Frequently Asked Questions
What does code P0341 mean on a 2020-2024 Ford Explorer?
Code P0341 indicates Camshaft Position Sensor Range / Performance. On the 2020-2024 Ford Explorer (2.3L EcoBoost I4, 3.0L EcoBoost Twin-Turbo V6, 3.3L V6 Hybrid), this fault is commonly triggered by: 10R60 10-speed transmission lead frame solenoid failure (P0700/P0751) or electric steering rack angle sensor.
Is it safe to drive my 2020-2024 Ford Explorer with code P0341?
Severity Assessment: 🔴 High Risk. If your check engine light is flashing or accompanied by rough running, hesitation, or unusual mechanical knocking, discontinue driving immediately to avoid catalytic converter burnout or valvetrain destruction.
What engine sounds are associated with P0341 on 2020-2024 Ford Explorer?
Drivers frequently report: Engine misfire sputter under acceleration, intermittent timing cover ticking. Listening closely to your engine audio helps verify whether the root failure is an electrical sensor glitch, vacuum line leak, or mechanical valvetrain wear.
How much does it cost to fix code P0341 on a 2020-2024 Ford Explorer?
Estimated repair costs for the 2020-2024 Ford Explorer typically range from – for replacement parts and – for professional labor at certified independent repair shops.